Sony OXF-R3 - Manual (Page 40)

3-14
Chapter 3 Getting Started
Chapter 3 Getting Started
3-8 Select To Faders
Select to Faders
The main purpose of faders on a mixing console is to control the levels of
the signals through the channels. Once a balance is achieved, the fader
positions give an extremely useful graphical representation.
It is common with in-line analogue console channel strips to split the
signal flow into channel and monitor paths with a fader for each. The
OXF-R3 takes this concept a stage further, allowing all level and gain
control to be accomplished using the faders. This is achieved by assigning
the faders to all gain and level functions via the SELECT TO FADERS
panel.
3-8 Select To Faders
INPUT GAIN
SENDS
GROUP TRIM
M/T SEND
CHANNEL FADER