Sony OXF-R3 - Manual (Page 113)

Chapter 4 Signal Paths
4-53
Chapter 4 Signal Paths
Defaults
The Defaults are defined in the start-up Config. File settings.
HF Filter
A low pass filter is available in the Sub channel when folding down from
7.1 to 5.1. Click on {HF FILT}, to the right of the GUI, to insert a filter with
a corner frequency of 120Hz and a slope of 24dB/Octave.
Snapshots
The Fold-Down settings are stored in Snapshots as part of the Centre
Section. “CEN” must be selected in the Snapshots GUI in order for these
settings to be recalled.
The Softkeys for these GUIs:
• TOP - Selects the top level LOGO screen
• FOLD # - Alternates between FOLD 1 and FOLD 2
• M/STEM - Selects the MULTI-STEM SET-UP GUI