Sony MDS-JE510 User Manual
Minidisc deck
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
This manual is related to the following products:
Table of contents
Document Outline
- MiniDisc Deck
- INFORMATION
- CAUTION
- Owner's Record
- Precautions
- Hooking Up the System
- Overview
- Hookups
- Connecting the AC power cord
- Press # REC.
- The deck becomes ready to record.
- When recording the analog input signal, adjust the recording level with REC LEVEL.
- The fourth dot is satisfactory for most purposes. For details, refer to "Adjusting the Recording Level" on page 11.
- Press O- or II. Recording starts.
- Start playing the program source.
- Notes on Recording
- Useful Tips for Recording
- Recording Over Existing Tracks Adjusting the Recording Level
- Marking Track Numbers While Recording (Track Marking)
- Starting Recording With 2 Seconds of Prestored Audio Data (Time Machine Recording)
- Synchro-Recording With Audio
- Equipment of Your Choice
- Marking Track Numbers While Recording (Track Marking)
- Starting Recording With 2 Seconds of Prestored Audio Data (Time Machine Recording)
- Synchro-Recording With Audio Equipment of Your Choice d
- Synchro-Recording With a Sony CD Player T
- Recording on an MD Using a Timer
- Using the Display
- Locating a Specific Track
- Locating a Particular Point in a Track
- Playing Tracks Repeatedly
- Playing in Random Order (Shuffle Play)
- Creating Your Own Program (Program Play)
- Useful Tips When Recording From MDs to Tape i
- Playing an MD Using a Timer
- Notes on Editing
- Erasing Recordings (Erase Function)
- Dividing Recorded Tracks (Divide Function)
- Combining Recorded Tracks (Combine Function)
- Moving Recorded Tracks (Move Function)
- Labeling Recordings (Title Function)
- Undoing the Last Edit (Undo Function)
- Display Messages
- System Limitations
- Troubleshooting
- Specifications
- Guide to the Serial Copy Management System
- Index