Sony OXF-R3 - Manual (Page 295)

Chapter 7 Session Management
7-35
Chapter 7 Session Management
This screen page displays all the Mixes & Cues which relate to the current title.
current and previous fader levels do not match. To set
the Ramp Time, highlight the field then click on, or
press {EDIT} on the Control Keyboard. It may be set
at between 1ms and 10s to a resolution of 1ms.
PRE-ROLL bar
The Pre-roll time in seconds is displayed here. When
locating to a specific timecode point, the machine
parks ahead of that time by the value set in this field.
Highlight the field then click on, or press {EDIT} on
the Control Keyboard, to obtain its pop-up to set or
adjust the Pre-Roll time.
7-6-5 Mixes & Cues Screen
TITLE and MIX bar
Displays the name of the current Title and current Mix.
Machine status bar
Situated to the right of the TITLE and MIX bar, this
field indicates the current operational status of the
timecode master machine e.g. PLAYING, FAST
WIND, FAST REWIND, STOPPED, PARKED.
RAMP TIME bar
(Relates to the RAMP button, beneath the central LCD)
This banner shows the Ramp Time currently set for
faders to slew to previous levels when joining/editing
mixes, or dropping out of automation record when
MIXES & CUES screen page