Sony OXF-R3 - Manual (Page 174)

6-12
Chapter 6 Technical Descriptions
Chapter 6 Technical Descriptions
6-2 Channels Section Panels
!£ SHOW VALUE Push-Button
Allows the display of gain/loss in dB on the upper scribble for the function
the fader is presently performing.
!¢ ? & / Push-Buttons
Step the ACCESS button selections one channel at a time in the direction
of the arrow.
!∞ ABS & TRM TO CUTS Push-Button
Assigns the {ABS} and {TRM} buttons above the faders to the Cuts.
!§ ABS & TRM TO FADERS Push-Button
Assigns the {ABS} and {TRM} buttons above the faders to the Faders.
!¶ SELECT R MASTER Push-Button (24-C-0 Control Surface only)
Causes the function selected under SEL in the right hand SELECT TO
FADERS panel to be assigned to the right hand 8 centre section faders.
This push-button inter-cancels with SELECT L MASTER push-button.
!• SELECT L MASTER Push-Button (24-C-0 Control Surface only)
Causes the function selected under SEL in the left hand SELECT TO
FADERS panel to be assigned to the left hand 8 centre section faders.
This push-button inter-cancels with SELECT R MASTER push-button.