Sony OXF-R3 - Manual (Page 289)

Chapter 7 Session Management
7-29
Chapter 7 Session Management
TIMECODE FORMAT
Displays the current timecode format. Click on it for a
pop-up to set an alternative timecode format.
For the system to function correctly, the TIMECODE
FORMAT selected here must match the incoming
timecode. IMPORTANT!
MACHINE CONTROLLER
Displays the current Machine Control mode. Click on
to select an alternative from:-
• MOTIONWORKER (STANDARD)
• MOTIONWORKER (PERFECT)
• NONE - TIMECODE CHASE ONLY
SELECT CURSOR
Displays the current cursor format. Click on it for a
pop-up to select an alternative.
RELOAD DATABASE
This function is only available to User ‘ADMIN’ and
is not used during normal operation. It allows the
database to be re-loaded from the system hard drive.
SYSTEM SHUTDOWN
This function is available to User ‘ADMIN’ only and
must be confirmed via a dialogue pop-up.
SAMPLE RATE
The Sample Rate must match the incoming word
clock. IMPORTANT!
NOMINAL RATE
Displays the current selected Sample Rate. Click on
for a pop-up to select an alternative.
ACTUAL RATE
Displays the Actual Rate of the incoming word clock.
MODE
Displays the current Sample Rate Mode. Click on to
select:
• NOMINAL
When filters and oscillators within the system are
fixed at their absolute frequencies regardless of the
incoming word clock frequency.
• TRACK
When filters and oscillators within the system track
the incoming word clock frequency.
Command Dialogue
At the base of the screen, the User Command Dialogue
Line bar displays commands from the dedicated
Control Keyboard and QWERTY Keyboard for
confirmation before {ENTER}.
Menu options
Menu options available using the softkey functions
displayed at the base of the System screen page are as
follows:
▲ - Selects the previous screen
page.
PROJECTS - Selects the ARTISTS/
PROJECTS & TITLES page
directly.
MIXES - Selects the MIXES & CUES
page for all mixing
functions.
MACHINES - Selects the MACHINES set-
up parameters page.
REMOTES - Selects the MACHINE
REMOTES assignment
matrix.
SNAPSHOT - Selects the SNAPSHOTS,
COPY & LINK page.
BACKUPS - Selects System BACKUPS
function.
SCREEN - Selects pop-up showing all
available screen selections.
Click on any one to select it.