Siemens MC35 - Manual (Page 95)

AT Command Set
MC35_ATC_01_V03.02 Page 95 of 228 13.03.2002
4.31 AT+CPIN Enter PIN
Test command
AT+CPIN=?
Response
OK
Read command
AT+CPIN?
Response
TA returns an alphanumeric string indicating whether or not a password is re-
quired.
+CPIN: OK
If error is related to ME functionality:
+CME ERROR:
Parameter
SIM PIN authentication
READY
PIN has already been entered. No further entry
needed.
SIM PIN ME is waiting for SIM PIN1.
SIM PUK ME is waiting for SIM PUK1 if PIN1 was dis-
abled after three failed attempts to enter PIN1.
SIM PIN2 ME is waiting for PIN2, when the attempt to ac-
cess PIN2 requiring features was acknowledged
with +CME ERROR:17 (e.g. if client attempts to
edit the FD phonebook).
SIM PUK2 ME is waiting for PUK2 to unblock a disabled
PIN2. Necessary if preceding command was ac-
knowledged with error +CME ERROR:18.
Phone security locks set by client or factory
PH-SIM PIN
ME is waiting for phone-to-SIM card password if
"PS" lock is active and user inserts other SIM
card than the one used for the lock. ("PS" lock is
also referred to as phone or antitheft lock).
PH-SIM PUK ME is waiting for Master Phone Code, if the
above "PS" lock password was incorrectly en-
tered three times.
Factory set SIM locks
PH-FSIM PIN
ME is waiting for phone-to-very-first-SIM card.
Necessary when "PF" lock was set. When pow-
ered up the first time, ME locks itself to the first
SIM card put into the card holder. As a result,
operation of the mobile is restricted to this one
SIM card (unless the PH-FSIM PUK is used as
described below).
PH-FSIM PUK ME is waiting for phone-to-very-first-SIM card
unblocking password to be given. Necessary
when "PF" lock is active and other than first SIM
card is inserted.