Siemens MC35 - Manual (Page 122)

AT Command Set
MC35_ATC_01_V03.02 Page 122 of 228 13.03.2002
for SMS-COMMANDs:
+CMGL: ,,,[
+CMGL: ,,,[...]] OK
for CBM storage:
+CMGL: dex>,,,,,[
+CMGL: ,,,,,
[...]]OK
2) If PDU mode (+CMGF=0) and command successful:
+CMGL: ,,[],
[+CMGL: ,,[alpha],
[...]] OK
for CBM storage:
+CMGL: ,
3) If error is related to ME functionality:
+CMS ERROR:
Parameter
string type alphanumeric representation of or corre-
sponding to the entry found in phonebook; implementation of this
feature is manufacturer- specific
GSM 03.40 TP-Command-Type in integer format (default 0)
GSM 03.40 TP-Destination-Address Address-Value field in string
format; BCD numbers (or GSM default alphabet characters) are
converted into characters; type of address given by
In case of SMS: GSM 03.40 TP-User-Data in text mode responses; format:
- if indicates that GSM 03.38 default alphabet is used and indi-
cates that GSM 03.40 TP-User-Data-Header-Indication is not set:
ME/TA converts GSM alphabet into current TE character set ac-
cording to rules of Annex A
- if indicates that 8-bit or UCS2 data coding scheme is used, or
indicates that GSM 03.40 TP-User-Data-Header-Indication is set:
ME/TA converts each 8-bit octet into hexadecimal numbers con-
taining two IRA characters (e.g. octet with integer value 42 is
presented to TE as two characters 2A (IRA 50 and 65))
In the case of CBS: GSM 03.41 CBM Content of Message in text mode re-
sponses; format:
- if >indicates that GSM 03.38 default alphabet is used: ME/TA con-
verts GSM alphabet into current TE character set according to
rules of Annex A
- if indicates that 8-bit or UCS2 data coding scheme is used: ME/TA
converts each 8-bit octet into hexadecimal numbers containing
two IRA characters