Siemens MC35 - Manual (Page 44)

AT Command Set
MC35_ATC_01_V03.02 Page 44 of 228 13.03.2002
3.8 AT+FDCC Query or set capabilities
Test command
AT+FDCC =?
This command allows the connected application to sense and constrain the
capabilities of the facsimile DCE (=ME), from the choices defined in CCITT
T.30 Table 2.
Response
(list of s), (list of
s), (list of s), (list of s), (list of s),
(list of s), (list of s), (list of s)
OK
Parameter
VR: Vertical Resolution, BR: Bit Rate, WD: Page Width, LN: Page Length, DF:
Data Compression Format, EC: Error Correction Mode, BF: Binary File
Transfer Mode, ST: Scan Time/Line.
Note: For further information see AT+FDIS, pg. 46
Read command
AT+FDCC?
Response
<dcc> OK
Parameter
See write command
Write command
AT+FDCC=,
,,,
,,,
Response
OK
Parameter
VR: Vertical Resolution, BR: Bit Rate, WD: Page Width, LN: Page Length, DF:
Data Compression Format, EC: Error Correction Mode, BF: Binary File
Transfer Mode, ST: Scan Time/Line.
Note : For further information see AT+FDIS, pg. 46
Reference
EIA PN-2388
Note
Used for Faxclass 2 only