Siemens MC35 - Manual (Page 149)

AT Command Set
MC35_ATC_01_V03.02 Page 149 of 228 13.03.2002
numeric parameter for the peak throughput class
0 network subscribed value
Peak Throughput Class Peak Throughput
(in octets per second)
1 Up to 1 000 (8 kbit/s)
2 Up to 2 000 (16 kbit/s)
3 Up to 4 000 (32 kbit/s)
4 Up to 8 000 (64 kbit/s)
5 Up to 16 000 (128 kbit/s)
6 Up to 32 000 (256 kbit/s)
7 Up to 64 000 (512 kbit/s)
8 Up to 128 000 (1 024 kbit/s)
9 Up to 256 000 (2 048 kbit/s)
numeric parameter for the mean throughput class
0 network subscribed value
Mean Throughput Class Mean Throughput
(in octets per hour)
1 100 (~0.22 bit/s)
2 200 (~0.44 bit/s)
3 500 (~1.11 bit/s)
4 1 000 (~2.2 bit/s)
5 2 000 (~4.4 bit/s)
6 5 000 (~11.1 bit/s)
7 10 000 (~22 bit/s)
8 20 000 (~44 bit/s)
9 50 000 (~111 bit/s)
10 100 000 (~0.22 kbit/s)
11 200 000 (~0.44 kbit/s)
12 500 000 (~1.11 kbit/s)
13 1 000 000 (~2.2 kbit/s)
14 2 000 000 (~4.4 kbit/s)
15 5 000 000 (~11.1 kbit/s)
16 10 000 000 (~22 kbit/s)
17 20 000 000 (~44 kbit/s)
18 50 000 000 (~111 kbit/s)
31 best effort.
Note: If parameters are not defined, the parameter default values depend
on the HLR-stored subscribed default values.
Definitions of parameters in GSM 02.60 and GSM 03.60 paragraph 15.2
“Quality of Service Profile“.
If some of the QoS parameters are omitted, they will keep their current
value (or the default value if not specified so far), e.g.
at+cgqmin?
OK
at+cgqmin=1,0
OK
at+cgqmin?
+CGQMIN:1,0,0,0,0,0
OK