At+clcc list current calls of me, 17 at+clcc list current calls of me – Siemens MC35 User Manual
Page 73
AT Command Set
MC35_ATC_01_V03.02
Page 73 of 228
13.03.2002
4.17 AT+CLCC List current calls of ME
Test command
AT+CLCC=?
Response
OK
Parameters
Execute command
AT+CLCC
Response
TA returns a list of current calls of ME. If command successful, but no calls are
available, no information response is sent to TE.
[+CLCC:
[
[
[
[...]]] OK
If error is related to ME functionality:
+CME ERROR:
Parameters
Integer type; call identification number as described in GSM
02.30[19] subclause 4.5.5.1; this number can be used in +CHLD
command operations
0 mobile originated (MO) call
1 mobile terminated (MT) call
state of the call:
0 active
1 held
2 dialing (MO call)
3 alerting (MO call)
4 incoming (MT call)
5 waiting (MT call)
bearer/teleservice:
0 voice
1 data
2 fax
9 unknown
0 call is not one of multiparty (conference) call parties
1 call is one of multiparty (conference) call parties
string type phone number in format specified by
type of address octet in integer format; 145 when dialling string
includes international access code character “+”, otherwise 129
string type alphanumeric representation of
sponding to the entry found in phonebook; used character set
should be the one selected with command Select TE Character
Set +CSCS
Reference
GSM 07.07
Note