Siemens MC35 - Manual (Page 17)

AT Command Set
MC35_ATC_01_V03.02 Page 17 of 228 13.03.2002
to called party)
<;> Only required to set up voice calls. TA remains in command mode.
Reference
V.25ter/GSM
07.07
Note
• There is no for emergency call (“EN”).
• Command is not supported for data call!
• Parameter only if no *# code is within the dial string.
• The *#-codes can only be used with voice calls (i.e.if “;” is appended).
• See also ATX and chapter 9.1.5 for .
Example To query the location number of the phonebook entry:
AT+CPBR=1,xx
TA returns the entries available in the active phonebook.
To dial a number from the SIM phonebook, for example the number stored to lo-
cation 15:
ATD>SM15;
OK
To dial a phone number stored in the last dial memory on the SIM card:
ATD>LD9;
OK