Siemens MC35 - Manual (Page 167)

AT Command Set
MC35_ATC_01_V03.02 Page 167 of 228 13.03.2002
7.4 AT^SSTR Remote-SAT Response
Test command
AT^SSTR=?
Response
^SSTR:(list of supported s), (list of supported s)
OK
Read command
AT^SSTR?
Response
^SSTR: ,
OK
Parameters
Remote-SAT interface state
Ongoing Proactive Command
Write command
AT^SSTR=
,
[,]
[,]
The TA is expected to acknowledge the ^SSTGI response with AT^SSTR to
confirm that the proactive command has been executed.
AT^SSTR will also provide any user information, e.g. a selected menu item.
Response
OK
Parameters
Number related to Proactive command or event type
Command status return regarding the type of action that has
taken place, e.g. action performed by the user.
id of menu item selected by user
string response entered by user
Reference
Siemens
Note