Siemens MC35 - Manual (Page 184)

AT Command Set
MC35_ATC_01_V03.02 Page 184 of 228 13.03.2002
8.15 AT^SMGO Set or query SMS overflow presentation mode or query SMS
overflow
Test command
AT^SMGO=?
Response
^SGMO: (list of supported s) OK
Parameter
See write command
Read command
AT^SMGO?
Response
TA returns overflow presentation mode and SMS overflow status
^SGMO: , OK
If error is related to ME functionality:
+CME ERROR:
Parameter
See write command
Write command
AT^SMGO=
Response
TA sets overflow presentation mode
OK
Parameter
SMS overflow presentation mode
0 disable (default)
1 enable
SMS overflow status
0 space available
1 SMS buffer full (buffer for received short messages is . See
AT+CPMS in Chapter 5.11)
2 Buffer full and new message waiting in SC for delivery to ME
Unsolicited result code
When the status SIM overflow changes, an unsolicited result code is sent to TE
^SMGO:
Parameter
See write command
Reference
Siemens
Note
• Indication during data transfer via break (100ms).
• Incoming Class 1 short messages (ME specific) will be preferably stored to
“ME” and may be transferred to the “SM” storage if “ME” is used up. Incoming
Class 2 messages (SIM specific) will be placed to the “SM” storage only.
If messages with different classes are received, the ^SMGO: 2 indication may
be presented, without prior indication of ^SMGO: 1. The indication ^SMGO: 1
means that both buffers ("ME" and "SM") are full. See also Chapter 5.11.
• For more information regarding SIM and ME specific message classes refer to
and the following specifications: GSM 03.38 and 3GPP TS 23.038.