Siemens MC35 - Manual (Page 170)

AT Command Set
MC35_ATC_01_V03.02 Page 170 of 228 13.03.2002
Dedicated channel:
chann
traffic channel number
Note: = h indicates frequency hopping.
TS timeslot no.
timAdv timing advance in bits
PWR current power level
dBm receiving level in dBm
Q receiving quality (0–7)
ChMod channel mode (S_HR: Half rate, S_FR: Full rate, S_EFR: Enhanced Full
Rate)
Reference
Siemens
Note
• If during a connection the radio cell is changed, the parameters LAC, Cell, NCC
BCC, PWR and RXLev of the ‘Serving Cell’ part will not be updated (see also
+CREG, pg 106).
• If the BS supports frequency hopping during a connection, the dedicated chan-
nel (parameter chann) is not stable. This mode is indicated by chann = ‘h’.
• As a result of this command the requested output may be issued by the ME at
any moment (related to ).
To indicate such unsolicited result codes to a connected application, the ME
usually activates it´s Ring Line (Logic "0") for one second. This is not true for
the unsolicited output of AT^MONI and AT^MONP.