Siemens MC35 - Manual (Page 77)

AT Command Set
MC35_ATC_01_V03.02 Page 77 of 228 13.03.2002
To lock the mobile to the currently inserted SIM card, first specify a password (=
a phone code):
AT+CPWD="PS",,1234
If "PS" lock has not been set before: enter new
OK
password.
or:
AT+CPWD="PS",1234,3333
To replace existing "PS" password: Enter old
OK
and new one.
Then, activate the phone lock:
AT+CLCK="PS",1,3333
Locks the mobile to the current SIM card.
OK
Example 2 To deactivate the phone lock:
AT+CLCK="PS",0,3333
Enter lock type "PS", followed by 0 to lift the
OK
lock. Then type "PS" lock password.
As a result, the mobile accepts any SIM card and can be operated after the
card's SIM PIN 1 was entered.
Example 3 To operate the mobile with the SIM card for which "PS" lock was activated:
AT+CPIN?
Enter SIM PIN used when locking the mobile.
+CPIN: SIM PIN
"PS"lock password is not needed.
AT+CPIN=9999
OK
Example 4 To operate the mobile with other SIM card than the one used for the "PS" lock:
Enter SIM PIN of present card, followed by "PS" lock password.
AT+CPIN?
Enter SIM PIN of present SIM card.
+CPIN: SIM PIN
AT+CPIN=1111
OK
SIM PIN accepted.
AT+CPIN?
+CPIN: PH-SIM PIN
"PS" lock password is required.
AT+CPIN=3333
OK
"PS" lock password has been accepted.
Example 5 Attempt to unblock the "PS" lock using an invalid password:
AT+CPIN?
Enter SIM PIN of present SIM card.
+CPIN: SIM PIN
AT+CPIN=1111
OK
SIM PIN accepted.
AT+CPIN?
+CPIN: PH-SIM PIN
"PS" lock password is required.
AT+CPIN=4444
Bad password is given:
+CME ERROR: incorrect password