Siemens MC35 User Manual
Page 172

AT Command Set
MC35_ATC_01_V03.02
Page 172 of 228
13.03.2002
8.4 AT^SACM Advice of charge and query of ACM and ACMmax
Test command
AT^SACM=?
Response
^SACM: (list of supported
Parameter
See write command
Execute command
AT^SACM
The execute command can be used to query the current mode of the Advice of
Charge supplementary service, the SIM values of the accumulated call meter
(ACM) and accumulated call meter maximum (ACMmax).
Response
^SACM:
+CME ERROR:
Parameter
See write command
ACM, string type; three bytes of the current ACM value in hexadeci-
mal format (e.g. “00001E” indicates decimal value 30) 000000–
FFFFFF
cimal format (e.g. “00001E” indicates decimal value 30) 000000 dis-
able ACMmax feature 000001-FFFFFF
string type; three bytes of the current CCM value in hexadecimal for-
mat (e.g. “00001E” indicates decimal value 30); bytes are coded in
the same way as ACMmax value in the SIM 000000-FFFFFF
Write command
AT^SACM=
The write command enables or disables the presentation of unsolicited result to
report the call charges.
Response
OK or if error is related to ME functionality: +CME ERROR:
Parameter
0
suppress unsolicited result code
1
display unsolicited result code
When you power down or reset the ME with AT+CFUN=1,1 the URC
presentation mode will be reset to its default. To benefit from the
URC it is recommended to have the setting included in the user pro-
file saved with AT&W, or to select
ME.
Unsolicited result code
When activated, an unsolicited result code is sent when the CCM value changes,
but not more often than every 10 seconds
+CCCM:
Reference
Siemens
Note
See also GSM07.07: AT+CACM, AT+CAMM, AT+CAOC