Siemens MC35 - Manual (Page 114)

AT Command Set
MC35_ATC_01_V03.02 Page 114 of 228 13.03.2002
4.43 AT+CSSN Supplementary service notifications
Test command
AT+CSSN=?
Response
+CSSN: (list of supported s), (list of supported s)OK
Parameter
0 Suppresses the +CSSI messages
1 Activates the +CSSI messages
0 Suppresses the +CSSU messages
1 Activates the +CSSU messages
Read command
AT+CSSN?
Response
+CSSN: ,OK
Parameter
See Test command
See Test command
Write command
AT+CSSN=[,]
Response
OK
Parameter
See read command
See read command
Unexpected message
+CSSI: When =1 and a supplementary service notification is
received after a mobile originated call setup, intermediate
result code +CSSI: is sent to TE before any
other MO call setup result codes
+CSSU: When =1 and a supplementary service notification is
received during a mobile terminated call setup or during
a call, unsolicited result code +CSSU: code2>is sent to
TE.
Parameter
Intermediate result code
3
Waiting call is pending
Unsolicited result code
0
The incoming call is a forwarded call.
5 Held call was terminated
Reference
GSM 07.07
Note