Siemens MC35 - Manual (Page 125)

AT Command Set
MC35_ATC_01_V03.02 Page 125 of 228 13.03.2002
0 “REC UNREAD” received unread message (i.e. new message)
1 “REC READ” received read message
2 “STO UNSENT” stored unsent message (only applicable to SMs)
3 “STO SENT” stored sent message (only applicable to SMs)
GSM 03.40 TP-Command-Type in integer format (default 0)
GSM 03.40 TP- Destination-Address Address-Value field in string format;
BCD numbers (or GSM default alphabet characters) are converted into cha-
racters; type of address given by
In case of SMS: GSM 03.40 TP-User-Data in text mode responses; format:
-if
indicates that GSM 03.38 default alphabet is used and indi-
cates that GSM 03.40 TP-User-Data-Header-Indication is not set:
ME/TA converts GSM alphabet into current TE character set ac-
cording to rules covered in Annex A
-if indicates that 8-bit or UCS2 data coding scheme is used, or
indicates that GSM 03.40 TP-User-Data-Header-Indication is set:
ME/TA converts each 8-bit octet into hexadecimal numbers con-
taining two IRA characters (e.g. octet with integer value 42 is pre-
sented to TE as two characters 2A (IRA 50 and 65)
In case of CBS: GSM 03.41 CBM Content of Message in text mode re-
sponses; format:
- if indicates that GSM 03.38 default alphabet is used: ME/TA converts
GSM alphabet into current TE character set according to rules cov-
ered in Annex A
-if indicates that 8-bit or UCS2 data coding scheme is used: ME/TA
converts each 8-bit octet into hexadecimal numbers containing two
IRA characters
depending on the command or result code: GSM 03.38 SMS Data Cod-
ing Scheme (default 0), or Cell Broadcast Data Coding Scheme in inte-
ger format
GSM 03.40 TP-Command-Data in text mode responses; ME/TA con-
verts each 8-bit octet into two IRA character long hexadecimal numbers
(e.g. octet with integer value 42 is presented to TE as two characters 2A
(IRA 50 and 65))
GSM 03.40 TP-Discharge-Time in time-string format: ”yy/MM/
dd,hh:mm:ss±zz”, where characters indicate year (two last digits),
month, day, hour, minutes, seconds and time zone. For example, 6th of
May 1994, 22:10:00 GMT+2 hours equals ”94/05/06,22:10:00+08”
depending on the command or result code: first octet of GSM 03.40
SMS- DELIVER, SMS-SUBMIT (default 17), SMS-STATUS-REPORT,
or SMS-COMMAND (default 2) in integer format
integer type value indicating in text mode (+CMGF=1) the length of the
message body (or ) in characters; or in PDU mode
(+CMGF=0), the length of the actual TP data unit in octets (i.e. the RP
layer SMSC address octets are not counted in the length).
In text mode, the maximum length of an SMS depends on the used
coding scheme: It is 160 characters if the 7 bit GSM coding scheme is