Siemens MC35 - Manual (Page 199)

AT Command Set
MC35_ATC_01_V03.02 Page 199 of 228 13.03.2002
8.34 AT^SPWD Change password for a lock
Test command
AT^SPWD=?
Response
^SPWD: (list of supported (, ) s) OK
If error is related to ME functionality:
+CME ERROR:
Parameter
“P2” PIN2
otherwise see write command without “FD”
integer, max. length of password
Write command
AT^SPWD =
, wd>,
Parameter
> Phone security passwords
“SC” SIM card (PIN)
“P2” PIN 2
“PS” Phone locked to SIM (device code)
Factory set locks
“PF” lock Phone to the very first SIM card
“PN” Network Personalisation
“PU” Network subset Personalisation
“PP” Service Provider Personalisation
“PC” Corporate Personalisation
Supplementary Service: Call barring
“AO” BAOC ( Bar All Outgoing Calls)
“OI”
BOIC ( Bar Outgoing International Calls)
“OX” BOIC-exHC (Bar Outgoing International Calls except to Home
Country)
“AI” BAIC ( Bar All Incoming Calls)
“IR” BIC-Roam ( Bar Incoming Calls when Roaming outside the
home country)
“AB” All Barring services
“AG” All outGoing barring services
“AC” All inComing barring services
Note: All call barring types have usually the same ME to
lock and unlock. The default is supplied from the network
provider. TA sets a new password for the facility lock function.
Password specified for the facility from the user interface or with
command.
Can be ignored if no old password was allocated to the facility. Take
into account that a password may have already been set by factory,
or that the service is subject to a password issued by the provider.