Siemens MC35 - Manual (Page 200)

AT Command Set
MC35_ATC_01_V03.02 Page 200 of 228 13.03.2002
See notes above or contact provider.
if = “SC” then PIN
if = “AO”...”AC” (barring) then network password (if needed)
if = “P2” then PIN2
new password
Response
OK
If error is related to ME functionality:
+CME ERROR:
Reference
Siemens
Note
See also specification of AT+ CPWD in GSM 07.07 and further details in Chapter
4.34.