At command set – Siemens MC35 User Manual
Page 224
AT Command Set
MC35_ATC_01_V03.02
Page 224 of 228
13.03.2002
Abbreviations of codes and responses
Codes / parameters to be sent with ATD
Barring services
330
ZZ = type of supplementary services:
All services
Not specified
DN = dialling number:
String of digits 0-9
Voice
11
FAX
13
SMS
16
SMS +FAX
12
Voice + FAX
19
Voice + SMS + FAX
10
Data circuit asynchron
25
Data circuit synchron
24
PAD
27
Packet
26
Data circuit asynchron + PAD
21
Data circuit synchron + packet
22
Data circuit asynchron + syncron. + PAD
20
BS = basic service
equivalent to parameter
All Services
---
T = time in seconds
PW = Password
C = character of TE character set (e.g. asterix, hash or digit in case of USSD, or digits in case of held calls or multiparty calls)
Possible responses
Mode: 0 = not active, 1 = active
Unsolicited result code: 0 = presentation disabled, 1 = presentation enabled
Status: 0 = not active, 1 = active
Represents BS = basic service
See Chapters 4.6 (AT+CCFC), 4.18 (AT+CLCK) and 9.4.1.
Facility lock. See Chapter 4.18 (AT+CLCK)
Call forwarding reason
Function of *# codes
*# code
Abbreviation used in
Chapter 9.4
Function
*
act
Activate
**
reg
Register and activate
*#
int
Check status (interrogate)
#
deact
Deactivate
##
eras
Unregister and deactivate