Siemens MC35 User Manual
Page 134
AT Command Set
MC35_ATC_01_V03.02
Page 134 of 228
13.03.2002
2
SMS-DELIVERs, except class 2 messages and messages in
the message waiting indication group (store message) are
routed directly to the TE using unsolicited result code:
+CMT: ,
+CMT:
3
Class 3 SMS-DELIVERs are routed directly to the TE using
unsolicited result codes defined in
data coding schemes result in indication as defined in
Rules for storing received CBMs depend on the relevant data coding
method (refer to GSM 03.38 [2]), the setting of Select CBM Types
(+CSCB) and this value:
0
No CBM indications are routed to the TE.
2
New CBMs are routed directly to the TE using unsolicited re-
sult code: +CBM:
abled) or +CBM:
3
Class 3 CBMs are routed directly to TE using unsolicited result
codes defined in
0
No SMS-STATUS-REPORTs are routed to the TE.
1
SMS-STATUS-REPORTs are routed to the TE using unsolic-
ited result code: +CDS:
enabled)
2
If SMS-STATUS-REPORT is routed into ME/TA, indication of
the memory location is routed to the TE using unsolicited result
code: +CDSI:
1
TA buffer of unsolicited result codes defined within this com-
mand is cleared when
Unsolicited result
code
Syntax of responses output when SMS is received:
+CMTI:
Indicates that new message has been re-
ceived
+CBMI:
Indicates that new CB message has been re-
ceived
+CMT: ,
+CBM:
Cell broadcast message is output directly
During each SMS or Cell Broadcast Messages the Ring Line will remain Logic “0“
for one second.