Enterasys Networks 2200 - Manual (Page 86)

System Resources Information Screen
4-30 Device Configuration Menu Screens
4.7 SYSTEM RESOURCES INFORMATION SCREEN
When to Use
To monitor the current switch utilization and the peak switch utilization. This screen provides
information concerning the processor used in the SmartSwitch device and the amount of FLASH
memory, DRAM, and NVRAM that is installed and how much of that memory is available.
How to Access
Use the arrow keys to highlight the SYSTEM RESOURCES INFORMATION menu item on the
Device Configuration Menu screen, and press ENTER. The System Resources Information screen,
Figure 4-12 , displays.
Screen Example
Figure 4-12 System Resources Information Screen
30691_18
Flash Memory Installed: 4 MB
DRAM Installed: 16 MB
NVRAM Installed: XX KB
Available: XXXXX Bytes
Available: XXXXX Bytes
Available: XXXXX Bytes
CPU Type: i960 HX 66 Mhz
Current Switch Utilization: 66%
Peak Switch Utilization: 75%
Reset Peak Switch Utilization: [NO]
SAVE
RETURN
RETURN EXIT