Enterasys Networks 2200 - Manual (Page 211)

GARP Configuration Screen
GARP Configuration Menu Screens 8-5
Field Descriptions
Refer to Table 8-2 for a functional description of each screen field.
Table 8-2 GARP Configuration Screen Field Descriptions
Use this field… To…
Port #
(Read-Only) See the number of front panel interfaces.
GMRP
(Toggle) Set the port to operate as a GMRP-aware port. The setting is only valid
if the GMRP Protocol field near the bottom of the screen is set to
Enable. The GMRP field setting toggles between Y (yes) and N (no).
The default is “Y”.
To set the port, refer to Section 8.2.1 .
GVRP
(Toggle) Set one port to operate as a GVRP-aware port.
NOTE: Only ports set as hybrid ports may be configured as
GVRP ports. To set a port to the hybrid mode of operation, refer
to
Section 7.4 .
The setting is only valid if the GVRP Protocol field near the bottom of
the screen is set to Enable. The GMRP field setting toggles between Y
(yes) and N (no). The default is “Y”.
To set the port, refer to Section 8.2.1 .