Enterasys Networks 2200 - Manual (Page 123)

Switch Configuration Screen
802.1 Configuration Menu Screens 6-5
Screen Example
Figure 6-2 Switch Configuration Screen
Field Descriptions
Refer to Table 6-2 for a functional description of each screen field.
Table 6-2 Switch Configuration Screen Field Descriptions
Use this field… To…
Switch Address
(Read-Only) See the base MAC address of the SmartSwitch device.
Number of Ports
(Read-Only) See the total number of switched ports on the SmartSwitch device.
Depending on the optional interfaces, there can be many virtual WAN
or ATM ports that will display on this screen.
Type of STA
(Toggle) Set the method (Spanning Tree Algorithm) that switches use to decide
which SmartSwitch device is the controlling (Root) switch. Valid
selection is IEEE, DEC, and None. To set the STA, refer to
Section 6.2.1 .
25042-18
Port #
1
2
3
4
5
6
7
8
State
learning
listening
forwarding
learning
listening
blocking
listening
listening
RETURN SAVE
MAC Address
00-00-1D-00-00-00
00-00-1D-00-00-01
00-00-1D-00-00-02
00-00-1D-00-00-03
00-00-1D-00-00-04
00-00-1D-00-00-05
00-00-1D-00-00-06
00-00-1D-00-00-07
Status
[ENABLED]
[DISABLED]
[ENABLED]
[DISABLED]
[ENABLED]
[DISABLED]
[ENABLED]
[DISABLED]
Switch Address: 00-00-1D-00-00-00
Number of Ports: 27
Type of STA: [DEC]
Age Time (sec): 300
NEXT EXIT PREVIOUS