General configuration screen, General configuration screen field descriptions, Figure 4-2 – Enterasys Networks 2200 User Manual
Page 61: Screen example, Field descriptions
General Configuration Screen
Device Configuration Menu Screens
4-5
Screen Example
Figure 4-2
General Configuration Screen
Field Descriptions
for a functional description of each screen field.
.
Table 4-2
General Configuration Screen Field Descriptions
Use this field…
To…
MAC Address
(Read-Only)
See the base physical address of the SmartSwitch device.
IP Address
(Modifiable)
See the IP address for the SmartSwitch device. To set the IP address,
refer to
. The IP address can also be set through Runtime
IP Address Discovery.
Runtime IP Address Discovery enables the SmartSwitch device to
automatically accept an IP address from a Boot Strap Protocol (BootP)
server on the network without requiring a user to enter an IP address
through Local Management.
30691_08
MAC Address:
IP Address:
Subnet Mask:
Default Gateway:
TFTP Gateway IP Addr:
Device Date:
Device Time:
Screen Refresh Time:
Screen Lockout Time:
Com: [ENABLED] Application: [LM]
Clear NVRAM: [NO]
Device Uptime XX D XX H XX M
IP Fragmentation: [ENABLED]
Operational Mode: [802.1Q SWITCHING]
00-00-ID-00-00-00
0.0.0.0
255.255.0.0
NONE DEFINED
0.0.0.0
RETURN
SAVE
10/11/1999
14:23:00
30 sec.
15 min.
EXIT