Enterasys Networks 2200 - Manual (Page 203)

Protocol Port Configuration Screen
802.1Q VLAN Configuration Menu Screens 7-35
Screen Example
Figure 7-8 Protocol Port Configuration Screen
Field Descriptions
Refer to Table 7-9 for a functional description of each screen field.
Table 7-9 Protocol Port Configuration Screen Field Descriptions
Use this field … To …
Classification Rule
Field
(Read-Only) See the VID, Classification, and Definition of the line selected in the
VLAN Classification Configuration screen. For example, in
Figure 7-8 , VID 1, Ether II Type, 0x0800 (DOD IP) was selected in the
VLAN Classification Configuration screen to access the Protocol Port
Configuration screen. All ports with YES in the Classify columns
indicate that they are associated with VID 1 and the Ether II Type
Classification. This causes the received VLAN 1, Ether II Type frames
that are received to be transmitted out all ports with the YES setting,
except for the port receiving the frame.
This will cause Ether II Type of type 0/0800 (DOD IP) frames to be
transmitted out all ports set to YES as frames belonging to VLAN 1.
31351_24w
RETURN EXIT SAVE PREVIOUS
1 Ether II Type 0x0800 (DOD IP)
Port Classify Port Classify Port Classify Port Classify
––– –––––– ––– –––––– ––– –––––– ––– ––––––
1 [NO ] 9 [NO ] 17 [NO ] 25 [NO ]
2 [NO ] 10 [NO ] 18 [NO ] 26 [NO ]
3 [NO ] 11 [NO ] 19 [NO ] 27 [NO ]
4 [NO ] 12 [NO ] 20 [NO ] 28 [NO ]
5 [NO ] 13 [NO ] 21 [NO ] 29 [NO ]
6 [NO ] 14 [NO ] 22 NO 30 [NO ]
7 [NO ] 15 [NO ] 23 [NO ] 31 [NO ]
8 [NO ] 16 [NO ] 24 [NO ] 32 [NO ]
SET ALL PORTS: [NO ] SET PORTS TO VLAN FORWARDING [NO ]
Classification Rule Field
NEXT