Enterasys Networks 2200 User Manual
Page 59
Device Configuration Menu Screen
Device Configuration Menu Screens
4-3
Menu Descriptions
for a functional description of each menu item.
Table 4-1
Device Configuration Menu Screen Menu Item Descriptions
Menu Item
Screen Function
GENERAL
CONFIGURATION
Used to monitor and configure the SmartSwitch device operating
parameters. For details, refer to
.
SNMP
CONFIGURATION
MENU
Used to access the SNMP Community Names Configuration, SNMP
Traps Configuration, and Access Control List screens. These screens
are used to modify SNMP community names, set SNMP traps and
provide additional security while managing the devices.
For details, refer to
.
SYSTEM
RESOURCES
INFORMATION
Displays the CPU type used in the device and its operating speed;
displays the size of each memory system used (FLASH memory,
DRAM and NVRAM) in the device and the unused portion of each
memory; and displays the current CPU (switch) utilization and the
peak switch utilization. For details, refer to
.
FLASH
DOWNLOAD
CONFIGURATION
Used to force the SmartSwitch device to download a new image file
from a TFTP server to its FLASH memory. For details, refer to
PORT
CONFIGURATION
MENU
Used to select the screens for configuring the SmartSwitch device
ports. For details, refer to
802.1
CONFIGURATION
MENU
Displays only if the SmartSwitch device has been configured to operate
as an IEEE 802.1Q switch as described in
. When
selected, the 802.1 Configuration Menu screen provides access to the
Switch Configuration screen, the 802.1Q VLAN Configuration Menu
screen, the 802.1 Priority Configuration Menu screen, the GARP
Configuration Menu screen, and the Rate Limiting Configuration
screen. For details, refer to
NOTE: The 802.1 Configuration Menu and associated screens
display only if the SmartSwitch device has been configured to
operate in the 802.1Q switch mode.