Enterasys Networks 2200 - Manual (Page 184)

Port Filtering Configuration Screen
7-16 802.1Q VLAN Configuration Menu Screens
Field Descriptions
Refer to Table 7-4 for a functional description of each screen field.
7.5.1 Displaying VLAN IDs Associated with a Port
To display the VLAN IDs and VLAN Names of the VLANs associated with a particular port,
proceed as follows:
1. Use the arrow keys to highlight the Port field.
2. Use the SPACE bar or BACKSPACE key to step through the available port selections. The
screen displays the Port VLAN List of the selected Port. If ALL is selected, no VLAN ID or
VLAN Name information is displayed under Port VLAN List.
Table 7-4 Port Filtering Configuration Screen Field Descriptions
Use this field … To …
VLAN ID
(Read-Only) See the VLAN ID of the VLANs that are configured to have their
frames transmitted out of the port selected in the Port field.
VLAN Name
(Read-Only) See the names of the VLANs associated with the VLAN ID. If a VLAN
does not have a name, “Not Defined” is displayed.
Port
(Selectable) Step to the port number of the interface being configured including the
selection of ALL ports.
Filter Using VLAN
Lists
(Toggle) Filter out (drop) frames that are classified, via their VLAN tag, as
belonging to a VLAN that is not on the Port VLAN List and prevent
them from being forwarded by the switch.
This field toggles between YES and NO. YES enables filtering
according to the Port VLAN List. NO allows the switch to forward the
frames. The default is NO.
Filter All Untagged
Frames
(Toggle) Filter out all incoming untagged frames so they will not be forwarded
by the switch. This field toggles between YES and NO. YES enables
the filtering of untagged frames. NO allows the switch to forward
untagged frames. The default is NO.