Enterasys Networks 2200 User Manual
Page 279
Quick VLAN Walkthrough
VLAN Operation and Network Applications
12-17
11.Use the SPACE bar to step sequentially through the previously configured VLAN ID numbers.
When the number 0002 (the new VLAN ID) is displayed, the FID field updates to 0002, and the
VLAN Name field updates showing the name assigned to this VLAN, TEST VLAN.
12.Use the arrow keys to highlight the SAVE command at the bottom of the screen. Press ENTER.
The PVID for Port 3 is now configured to the TEST VLAN. The TEST VLAN is also added to
the Port VLAN List for Port 3 with a frame format of Untagged. The screen should now look
like
.
Figure 12-7
Walkthrough Stage Two,Port Assignment Configuration Screen
Now that port 3 belongs to the TEST VLAN, we will designate one port as a 1Q Trunk port for a
connection to another VLAN-aware switch. This 1Q Trunk port will carry traffic from all VLANs,
allowing VLAN frames to maintain their VLAN ID across multiple switches.
13.Use the arrow keys to highlight the Port Mode field for port 10. Use the SPACE bar or
BACKSPACE key to step sequentially through the possible settings of the port until 1Q
TRUNK is displayed.
NOTE: For the purposes of this walkthrough, port 10 will be configured as the trunk
port.
4046_81
RETURN
EXIT
Port
1
2
3
4
5
6
7
8
9
10
11
12
Port Mode
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
[HYBRID]
VLAN Name
Default VLAN
Default VLAN
TEST VLAN
Default VLAN
Default VLAN
Default VLAN
Default VLAN
Default VLAN
Default VLAN
Default VLAN
Default VLAN
Default VLAN
SAVE
PREVIOUS
NEXT
VLAN ID
[0001]
[0001]
[0002]
[0001]
[0001]
[0001]
[0001]
[0001]
[0001]
[0001]
[0001]
[0001]
FID
0001
0001
0002
0001
0001
0001
0001
0001
0001
0001
0001
0001