Enterasys Networks 2200 - Manual (Page 101)

Ethernet Port Configuration Screen
Port Configuration Menu Screens 5-7
5.3 ETHERNET PORT CONFIGURATION SCREEN
When to Use
To change the operating mode of a specific Ethernet interface, such as the speed, duplex,
auto-negotiation, advertised ability, and the flow control settings. Configuring optional Fast
Ethernet or Gigabit Ethernet ports is also done on this screen.
How to Access
Use the arrow keys to highlight the desired Ethernet port on the Ethernet Interface Configuration
screen and press ENTER. The Ethernet Port Configuration
screen, Figure 5-3 , displays for the
desired port.
Screen Example
Figure 5-3 Ethernet Port Configuration Screen
30691_22
RETURN EXIT SAVE
Interface: 25 Physical Port: 1
Default Speed: [ 100]
Default Duplex: [ Full]
Auto-Negotiation State: [Enabled ]
Advertised Ability: [100Base-TXFD] [Enabled]
Full Duplex Flow Control: [Auto-Negotiate]
Half Duplex Flow Control: [On]
SAVE TO ALL PORTS