beautypg.com

2 setting the reset peak, Setting the reset peak -24, Section 5.8.2 – Enterasys Networks 2200 User Manual

Page 118

background image

Broadcast Suppression Configuration Screen

5-24

Port Configuration Menu Screens

5.8.2

Setting the Reset Peak

To set the Reset Peak field to YES or NO, proceed as follows:

1. Use the arrow keys to highlight the Reset Peak field for the selected port.

2. Press the SPACE bar to select YES or NO.

3. Use the arrow keys to highlight the SAVE command at the bottom of the screen.

4. Press ENTER. The message “SAVED OK” displays and the Time Since Peak field is also reset.

See also other documents in the category Enterasys Networks Computer Accessories: