Enterasys Networks 2200 - Manual (Page 128)

Port Priority Configuration Screen
6-10 802.1 Configuration Menu Screens
6.4 PORT PRIORITY CONFIGURATION SCREEN
When to Use
To set the priority (0 through 7) on each port. A port receiving a frame without priority information
in its tag header is assigned a priority according to the priority setting on the port. For example, if
the priority of a port is set to 5, all frames received through that port without priority indicated in
their tag header are classified as a priority 5.
A frame with priority information in its tag header is transmitted according to that priority.
How to Access
Use the arrow keys to highlight the PORT PRIORITY CONFIGURATION menu item on the
802.1 Priority Configuration Menu screen and press ENTER. The Port Priority Configuration
screen,
Figure 6-4 , displays.
PRIORITY
CLASSIFICATION
CONFIGURATION Used to assign transmit priorities to protocol types of received frames
and to access the Protocol Port Configuration screen to add or delete
transmitting ports associated with a specific priority. For details, refer
to
Section 6.7 .
NOTE: The Port Priority Configuration screen does not display when the operational
mode of the device is set to SECURE FAST VLAN.
Section 4.2.9 provides instructions for setting the operational mode.
Table 6-3 802.1 Priority Configuration Menu Screen Menu Item Descriptions (Continued)
Menu Item Screen Function