Yaskawa MotionSuite Series Machine Controller Software Manual - Manual (Page 432)

MotionSuite™ Series Machine Controller Software Manual Chapter 12: Printing
12-12
Detailed M Register Setting
The M Register Detail List dialogue box is displayed upon selecting the Details but-
ton. Input (in hexadecimal form) the start number and end number of the M register to
be printed. The M register usage status list is printed before the M register if the Map
List option is checked. The selection method of the register range is the same as that
for S registers. See Detailed S Register Setting in this item.
Detailed D Register Setting
The D Register Detail List dialogue box is displayed upon selecting the Details button.
Designate either Select All or Individual Selection in this box. All drawing/function
program D registers are printed if Select All is designated. Selecting a drawing/func-
tion program prints the D register used in that program if Individual Selection is desig-
nated. The M register usage status list is printed before the M register if the Map List
option is checked. The selection method for D registers is the same as that for drawing
programs. See Item 12.2.2 “Detailed Program Setting: Detailed Setting of Drawing
Programs.”