Yaskawa MotionSuite Series Machine Controller Software Manual - Manual (Page 13)

MotionSuite™ Series Machine Controller Software Manual Chapter 1: Outline of Programming Unit
1-2
1.1 Basic Specifications
MotionWorks™ is a programing software used to program the MotionSuite™ series
machine controller on a PC.
MotionWorks™ and the controller are connected by an RS-232C communication inter-
face.
1.1.1 Recommended PC Specifications
The recommended PC specifications for operating MotionWorks™ are shown as fol-
lows:
Hardware/Software Specifications
PC Architecture IBM PC compatible
CPU Pentium 133MHZ or greater (or equivalents)
Display Resolution 800 × 600 dot or greater
Memory 32MB or greater
Hard Disk 100MB Free space
Operating System Windows95/98/NT
Installation CD-ROM
Programing Unit Controller
.
RS-232C