Yaskawa MotionSuite Series Machine Controller Software Manual - Manual (Page 161)

MotionSuite™ Series Machine Controller Software Manual Chapter 6: Module Configuration
6-17
7. Word
The serial word numbers of the register are displayed. The machine controller is
fixed at “1”.
8. SCAN
Set up the transfer process scan.
9. Current Value
In on-line mode, the current value of the distributed PLC register is displayed
with binary digits. The current value of the “discrete output” can be changed, and
is saved in the PLC register immediately following confirmation of the input.
Nothing is displayed in off-line mode.
10. Hexadecimal
The contents in the current value row are displayed in hexadecimal. Nothing is
displayed in the off-line mode.
6.5.3 Saving the Local I/O Configuration
Follow the steps below to save the local I/O configuration data.
a. Select File (F) → Save (S) from the menu.
b. Choose the Yes button in the message box when confirming the message
contents.
High High-speed process scan
Low Low-speed process scan
(NA) No scan designation