Yaskawa MotionSuite Series Machine Controller Software Manual - Manual (Page 119)

MotionSuite™ Series Machine Controller Software Manual Chapter 4: File Manager
4-62
4.12.4 Saving User Manager Data
User Manager data is saved by choosing the OK button in the User Manager dialog
box. It is saved in both the PLC and hard disk in the on-line mode and saved in hard
disk in the off-line mode.
The User Manager dialog box is closed after the data is saved.
Note:
An error message box appears if the data save fails.
4.12.5 Setting Default User
Instead of inputting the user name and password every time when logging to each PLC
in the File Manager Window, set up a default user so that it can be used for subsequent
log-on operations.
a. Select Default User Set (D) from Edit (E) in the File Manager menu.
b. Input the user name and password in the dialog box, then choose the OK button.