Yaskawa MotionSuite Series Machine Controller Software Manual - Manual (Page 186)

MotionSuite™ Series Machine Controller Software Manual Chapter 7: System Data Definition
7-13
7.3 Motion Parameter Definition
This section deals with the setting of motion parameters. In motion parameter setting, it is
necessary to set (reference) the necessary data using the four tabs: Fixed Parameters, Set-
up Parameters, Servo Amplifier, and Parameter Monitor.
7.3.1 Structure of Motion Parameter Window
A description of the Motion Parameter window menus and tabs appears below.
Structure of Motion Parameter Window Menus
See Item 7.1.3 “Definition Screen Call-out” before opening the Motion Parameter
window.
Note:
The Motion Parameter window cannot be opened when the servo module (network, SVA,
etc.) has not been defined in the module Configuration Definition Window. Moreover, the
Motion Parameter window cannot be opened in the on-line mode if the current CPU num-
ber is 2.
The menus displayed in the Motion Parameter window are listed in Table 3. Reference the
item numbers in Table 3 for each menu function.
Table 3: Motion Parameter Window Menu
Menu Function Item No.
File (F)
File Manager (F) Opens File Manager 3.4.2
Open (O) Opens various function windows 5.1
Close (C) Closes the motion parameter window 7.3.8
Regist User Menu (U) Register User Menu —
Save (S) Saves motion parameters 7.3.6
Delete (D) Deletes motion parameters 7.3.7
Print (P) Prints document Ch. 12
Exit (X) Exits Engineering Manager 3.4.2
Edit (E)
Default Setting (R) Sets default values 7.3.2
View (F)
Tool Bar (T) Displays tool bar 3.4.3
Status Bar (B) Displays status bar 3.4.3
Window (W)
Cascade (C) Displays the windows in cascade form 3.4.4
Tile Displays the windows in tile form 3.4.4
Arrange Icons (A) Displays arranged icons 3.4.4
Help (H)
About App. (A) Displays version data 3.4.5