Yaskawa MotionSuite Series Machine Controller Software Manual - Manual (Page 129)

MotionSuite™ Series Machine Controller Software Manual Chapter 4: File Manager
4-72
b. Choose the Run button if you want to switch the PLC to run status, otherwise,
choose the Stop button.
The PLC status has been switched.
Note:
The current PLC status is displayed as . The PLC status cannot be switched in off-
line mode or when not logged on to the PLC.
Starting Transfer
Follow the steps below to execute the All File Transfer.
a. Select Execute (S) from File (F) in the File Transfer menu.
b. Choose the Yes button in the message box.
c. Choose the OK button in the message box when the transfer is complete.
Note:
1. If a file is transferred to the PLC, execute the transfer when the PLC is in Stop
status. See Item 4.13.2 “All Transfer Changing PLC Status” for PLC running and
stopping methods.
2. The All File Transfer window is opened when the file transfer is complete.
Error During Transfer
a. When an error occurs during the transfer, an error window appears after the
transfer is complete.