Yaskawa MotionSuite Series Machine Controller Software Manual - Manual (Page 116)

MotionSuite™ Series Machine Controller Software Manual Chapter 4: File Manager
4-59
b. The user has been registered.
User Name
Input the user name, using 16 characters or less, but do not use a space or comma.
Duplicate user names cannot be input. Also, since User-A, User-B, and User-C are
already registered as users in the MotionWorks™ system, they cannot be used again.
Password
Input a password that corresponds to the user name, using 16 characters or less. As soon as
the user name is different, the password can be duplicated. Moreover, password input can
be omitted.
User Privilege
Input the read privilege of the program already created to the R (read) row, and the write
privilege of the program already created to the W (write) row in a value range of 0~7. The
larger the value, the greater the privilege.
Default User
Input the read privilege of the newly created program to the R (read) row, and the write
privilege of the newly created program to the W (write) row in a value range of 0~7. The
larger the value, the greater the privilege.
Standard Registered User
In the MotionWorks™ system, a standard registered user has been set up for each PLC.
Moreover, standard user privileges and default privileges are also registered. They are
shown as follows.
Table 4.21: Standard Registered User
User Name Password User Privilege Default Privilege Reference
USER-A USER-A R7W7 R0W1 For user manager
USER-B USER-B R1W1 R0W1 For user maintenance personnel
USER-C USER-C R1W0 R0W1 For user operator