Yaskawa MotionSuite Series Machine Controller Software Manual - Manual (Page 247)

MotionSuite™ Series Machine Controller Software Manual Chapter 7: System Data Definition
7-74
This column displays the Fault relay. The fault relay is set in the Failures tab.
2. Contact
This column displays the contact designation. The contact designation is set in
the Failures tab.
3. Rank
This column displays the fault rank. Fault ranks are set in the Failures tab.
4. Occurrence
This column displays the time at which a fault occurred.
5. Failure Name
This column displays the failure name. Failure names are set in the Failures tab.
7.8.6 Fault Trace
This function displays current fault occurrence states and recovery status for previ-
ously occurred faults in the Trace tab. The items in the Trace tab are as follows:
1. Relay
This column displays the Fault relay. The fault relay is set in the Failures tab.
2. Contact
This column displays the contact designation. The contact designation is set in
the Failures tab.
3. Rank
This column displays the fault ranks. Fault ranks are set in the Failures tab.
4. Occurrence
This column displays the time at which a fault occurred.
5. Restoration
1 2 3 4 6 5