Yaskawa MotionSuite Series Machine Controller Software Manual - Manual (Page 149)

MotionSuite™ Series Machine Controller Software Manual Chapter 6: Module Configuration
6-5
6.2.2 Setting the Module Configuration
When the Module Configuration is selected, the following definition window is
displayed.
Configuration Rack Data
1. Rack
Set up the rack type (rack1 to rack4).
Setting the Rack Data
Set up the configuration of the modules installed in each slot from rack1 to rack4. Select
the tab from rack1 to rack4.
2. Number
Displays the number of the slot that installs the module. The slot number is
fixed; it cannot be changed or added.
3. Module
Select the name of the module to be installed. The module is fixed; it cannot be
changed or added.
1
2
3
4
5
6
7
8
9
10
11
12
13