Yaskawa MotionSuite Series Machine Controller Software Manual - Manual (Page 135)

MotionSuite™ Series Machine Controller Software Manual Chapter 4: File Manager
4-78
4.13.4 Changing Transfer Source and Transfer Destination
The transfer object PLC, floppy disk, etc. can be modified. Refer to Item 4.13.2 “All
Transfer Changing Transfer Source and Destination” for changing methods.
4.13.5 Setting Detailed Data
When the Detail button appears at the right side of the transfer object, detailed data
must be set up. To set up the detailed data, first click the Detail button, then set up the
data in the dialog box, choose the OK button. The following screen is displayed after
the Detail button in the DWG window is selected.
All detailed data setting windows are described as follows.
a. DWG
Select the DWG program to be transferred. The selection can be cleared by
choosing CNCL-A button. As soon as the SLCT-A button is chosen, all DWG
programs are transferred.
b. FUNC
Select the Function program to be transferred. The selection can be cleared by
choosing the CNCL-A button. As soon as the SLCT-A button is chosen, all
Function programs are transferred.