Yaskawa MotionSuite Series Machine Controller Software Manual - Manual (Page 393)

MotionSuite™ Series Machine Controller Software Manual Chapter 10: Monitor
10-19
4. Program status of task 1
The execution status of the program which is being operated in task 1 is dis-
played. There are the following displays:
• During program operation
• Program operation stopped temporarily
• During program abort
• Program debugging stopped
• Program operation alarm occurred
• Program operation brake occurred
• During program debug
• Error of duplicated main program
• Over error of main program number
5. Main program and program status of tasks 2 ~ 4
The main program and program status of tasks 2 ~ 4 are displayed. The display
contents are the same as task 1.
Detailed View
The detailed view can be switched from the task monitor menu by selecting View (V) →
Detailed Mode (M). If it is selected again, the standard view mode is displayed.
1. Group
The group name set by the group definition is displayed.
2. Group mode
The execution status of the group is displayed. For view contents, refer to the
“Standard view.”
1 2 3 4 5 6