Yaskawa MotionSuite Series Machine Controller Software Manual - Manual (Page 260)

MotionSuite™ Series Machine Controller Software Manual Chapter 8: Ladder Programming
8-12
with identical register numbers within a single scanned ladder drawing. If the ladder
program for which this function is executed is a sub-ladder, then the symbols of the
parent ladder are scanned, and the register numbers determined. At this time it is nec-
essary to define the symbols subject to upper level link in the source drawing before-
hand.
a. Input the symbol definition data to be upper level linked in the following man-
ner.
b. Select Symbol Link (L) from the Data (D) menu.
c. Definition data within different drawings of the same type which are in the upper
level are scanned, and their contents displayed.
Note:
In (a) do not input any data into the Register Number and Size boxes. Input MTBL
into the Range box.
8.1.5 # Register Lists
This section deals with the methods for setting and modifying # register values.
Setting of # Register Values
The following screen is displayed upon clicking the # Register List tab on the Prop-
erty window. The content of the # register is set in this screen. This function cannot
be operated if the # register size in the Configuration Definition tab is set to 0.