Yaskawa MotionSuite Series Machine Controller Software Manual - Manual (Page 122)

MotionSuite™ Series Machine Controller Software Manual Chapter 4: File Manager
4-65
File Transfer Function
As shown in Table 4.22, there are three (3) types of File Transfer. The file transfer
function can be selected from each type.
4.13.2 All Transfer
Follow the procedures below to transfer programs or definition data one after another.
a. The following message box appears when opening the All Transfer window.
Table 4.22: File Transfer Type
Transfer Type Transfer Process Function Reference
All Transfer
All Load (HD →CPU)
Transfers programs or
definition data one
after another
—
All Dump (CPU →HD)
All Compare (CPU<->HD)
All File Transfer (HD
→FD)
All File Transfer (FD →HD)
All File Transfer (HD →Other Media)
All File Transfer (Other Media →HD)
Individual Transfer
Individual Load (HD →CPU)
Transfers specified
program or definition
data individually
—
Individual Dump (CPU →HD)
Individual Compare (CPU<->HD)
Individual File Transfer (HD
→FD)
Individual File Transfer (FD →HD)
Individual File Transfer (HD →Other Media)
Individual File Transfer (Other Media →HD)
Continuous Transfer
Continuous Load (HD →CPU)
Transfers programs or
definition data of mul-
tiple PLCs
—
Continuous Dump (CPU →HD)
Continuous File Transfer (HD →Other Media)
Continuous File Transfer (Other Media →HD)