Yaskawa MotionSuite Series Machine Controller Software Manual - Manual (Page 348)

MotionSuite™ Series Machine Controller Software Manual Chapter 8: Ladder Programming
8-100
Note:
Here, the number of rows is not actually decreased; the setting data is shifted upward
by the number of rows deleted. The actual number of rows can be decreased by
changing the number of rows in the table definition. See Item 8.6.3 “Table Operation
in the List Window: Correction of Table Definition Data”.
c. Cutting Data
This function cuts a designated area of data. The cut data is copied into the cut
buffer. The contents of the cut buffer can be repeatedly copied by using the
Paste function.
c.1 Select the area to be cut.
c.2 Select Cut (T) from Edit (E) in the Column Attribute menu.
c.3 The data in the area selected in (c.1) is cut.
d. Copying Data
This function copies a designated area of data. The copied data is copied into the
cut buffer.
d.1 Select the area to be copied.
d.2 Select Copy (C) from Edit (E) in the Column Attribute menu.
d.3 The data in the area selected in (c.1) is copied into the cut buffer.