Grass Valley K2 AppCenter v.9.0 - Manual (Page 97)

Selecting Playlist application
The Playlist application requires a single play channel. If a play channel is currently being used by
another application, you can select the Playlist application. Selecting the Playlist application causes
the current application to exit when Playlist application is started.
To start Playlist application on a play channel, in the channel’s monitor pane, select the application
drop-down list and choose
Playlist . The channel switches to Playlist application and becomes the
selected channel.
Changing the channel application in AppCenter to Playlist switches the working bin to the bin
displayed in the Clips pane rather than the bin specified for that channel. This behavior is also
observed if you have the working bin set to one bin but load a clip from another bin onto the channel.
Guide to using Playlist application
Playlist allows you to manage a list— insert, move, or modify events, and to control playout of the
list. You can also select the type of display for the asset list– text view, or thumbnail view. The
following describes the basic controls.
List in thumbnail mode
Description and User Operation Control
Though each play event contains the timecode information from its source
clip, the timecode for the list is generated internally. This timecode can be
an offset from a specific timecode (the default is 01:00:00;00). Playlist Timecode 1
29 October 2012 K2 AppCenter User Manual 97
Working with playlists