Grass Valley K2 AppCenter v.9.0 - Manual (Page 170)

3. Configure settings as follows:
Configure as needed... For this setting...
If licensed for AppCenter Elite you can configure the channel to be a
ChannelFlex Suite Channel. When you do so, settings change
accordingly. Type
If desired, enter a name for the channel. Name
Changing video input format does not require a restart of the K2
Summit/Solo system. If changing between SD and HD, however, there
is a wait time up to 24 seconds for each recorder channel after clicking
the
OK button in Configuration Manager.
Input format
Settings are available, based on codec option cards, HD licensing
options, and input formats. Compression format
K2 Summit/Solo system are SDI only. Input type
If 720p or 1080i selected: Video input
• Green LED — input present
• Black LED — input not present
If 720p or 1080i selected: Ancillary data timecode
inputs (LTC or VITC)
• Green LED — input present
• Black LED — input not present
Turn on or off as desired. VITC settings vary based on selection. Automatic VITC
detection
Available range varies, based on NTSC or PAL selection Starting VITC line or
VITC line 1
Available range varies, based on NTSC or PAL selection Ending VITC line or
VITC line 2
Refer to AFD specifications. AFD settings
Related Topics
Active Format Description (AFD) specifications on page 237
ChannelFlex Suite and licensing on page 198
170 K2 AppCenter User Manual 29 October 2012
Audio/Video Configuration